Motors and Flying

7 articles

How do I replace the motors on my CoDrone Mini?

If you need to replace the motors on your CoDrone Mini, please follow the tutorial video below:. Replacement motors for the CoDrone Mini can be found at the Robolink shop.

Updated by Robolink Support

My CoDrone Mini is spinning and drifting even after I set the trim.

This is likely due to a sensor failure. Do a hard sensor reset by pressing and holding the "Reset" button on the remote and double-check there is no damage or debris in the propellers. After resettin…

Updated by Leila Firestone

The propellers are spinning but my CoDrone Mini is not taking off.

If your CoDrone Mini is not taking off even though the propellers are spinning, then either the battery is low or the propellers are in the wrong orientation. Make sure that your CoDrone Mini's batte…

Updated by Leila Firestone

How do I stop the CoDrone Mini motors while flying?

You have the ability to emergency stop all of the motors while flying or running autonomous code. Press and hold the "Start/Stop" button while simultaneously holding down the left joystick. If you wa…

Updated by Leila Firestone

What do I do if my CoDrone Mini propeller or motor breaks?

CoDrone Mini motors and propellers are built to be durable, but accidents happen! Email us at support@robolink.com with an image of your broken part and you will be able to buy some replacements.

Updated by Leila Firestone

My CoDrone Mini crashed and now it doesn't fly anymore.

Your propellers may have been damaged or disconnected. Repair your propellers. If your CoDrone Mini still doesn’t fly, take a look at the motor and battery connections and make sure those are still i…

Updated by Leila Firestone

I am paired to my CoDrone Mini but it won't takeoff.

The battery may be low. Please connect the CoDrone Mini battery to a charger. If your battery is full, your program may have skipped a pair or takeoff command. Add a wait 1 second block if using Bloc…

Updated by Leila Firestone

Powered by HelpDocs (opens in a new tab)

Powered by HelpDocs (opens in a new tab)